The machine can be sublimated, solvent ink color patterns and words by heat transfer in cotton, hemp, woven fabric, also can make the hair heat transfer and sparkle heat printing, economical and practical.

Technical parameters:

Voltage Voltage 180V ~ 240VAC, 50Hz

The power consumption  1800W-2200W

Pressure: Pressure 35% ~ 85% (without condensation)

Temperature range: Temperature range 0-400

Time range: Time range 0-200S

Work table size: Work table size 38*38 40*50 40*60CM

Weight: Avoirdupois 120kg 135kg 150kg 250kg

Accurate temperature grade level 0.5

Ambient temperature 0 ℃ ~ 50 ℃

Product features:

1, using microcomputer intelligent temperature controller, high accuracy, and a temperature automatic tracking function (temperature precision is up to ± 0.5 ° C);

2, digital display, temperature and time of high accuracy;

3, heating pipe and the heating plate in whole, safe and durable heat uniform heating, thermal conductivity and strong;

4, the heating plate fluorinated antisticking coating peptide;

5, bottom plate is provided with high temperature resistant silicone foam, high temperature 400 ℃ constant type;

6, beautiful appearance, small and exquisite, can effectively improve the work efficiency;

7, the pressure can be adjusted, widely used in factory assembly line;

Operating instructions:

1, plug in the power, turn on the power switch; (the rated voltage of 220V, the maximum input power 1800W)

2, set the temperature time operating procedures: (the device temperature display for the degrees Celsius)

1) the temperature setting: press the SET key once, when the SV window indicating lamp is bright, according to (▲ add key) or (▼ subtraction key) temperature settings, press SET to return the interface set;

2), time setting: press the ST key once, when the SV window indicating lamp is bright, the bar or reduce the key setting time, set up by ST to return the interface

C, set the temperature control instrument;

D, set the time meter;

E, such as the choice of automatic operation as long as the sliding off the bench and pneumatic under the pressure, the time to automatically return.

F, such as the choice of manual operation, the middle station to the heating plate work place objects sliding, start a manual button, pneumatic under pressure, the time to automatically return.

G, such as position does not find hot stamping process, then click the "emergency stop" stop ironing, modified clockwise "emergency stop" auto reply working machine.

H, pressure: if the pressure is not enough or too large, adjustable cylinder upward pressure valve, to (+) direction (a) to increase the pressure, reduced pressure (please note the cylinders are lubricating oil).

Repair.

1 temperature: when the equipment set temperature after heating plate no fever or fever is not uniform, should check the circuit temperature controller and thermocouple thermocouple, such as broken, then the thermostat to display a 1, should be replaced.

The 2 time: when the switch to "manual", press the "manual" not under pressure, check the "manual" switch, when the switch to "automatic", is in place not under pressure, should check the contact switch contact point is in place, if not normal should be adjusted.

3 as a result of quality problems, please contact with the company.